Outils à Compression

Compression tools are the ideal choice when cutting single or double-sided laminate material with a variety of cores (MDF, Particle Board, Plywood, etc). Specially designed to assist in chip removal as well as providing a perfect top and bottom edge, compression tooling eliminates the need for costly secondary sanding operations.

1/4" x 5/8" x 1/4" x 2-1/2" oal u/d 2+2 fl

VX03115
Ajouter au panier

1/4" x 3/4" x 1/4" x 2-1/2"

CUD-250-2
Ajouter au panier

1/4" x 7/8" x 1/4" x 2-1/2" oal 2fl U/D

VX03110
Ajouter au panier

1/4" x 7/8" x 1/4" x 2-1/2" oal, 1 fl, RH, comp

VX03010
Ajouter au panier

3/8" x 7/8" x 3/8" x 3" oal, 2+2 fl up/down w/ 1/4"upcut

VX03185
Ajouter au panier

3/8" x 1" x 3/8" x 3"

CUD-375-2
Ajouter au panier

3/8" x 1-1/8" x 3/8" 3"OAL 3 FL U/D Chipbreaker

VX03230C
Ajouter au panier

3/8 x 1-1/16 x 3/8 x 3 OAL U/D 2 FL COATED

R60-12012UM
Ajouter au panier
Ultimax line of coated tooling

** Introducing the Ultimax line of coated tools. The special coating will prolong the life of the tool in abrasive materials, in most cases the coated tools have lasted 2-3 times longer that the regular carbide tools. **

 

Note: The coating will not prevent chipping cause my debris in the material. These tools can be sharpened but the coating will be removed and will no longer be effective after the sharpening.

1/2" x 1" x 1/2" x 3" oal up/down, 3fl w/mortise 1/4" up

VX03289
Ajouter au panier

1/2" x 1-3/8" x 1/2" x 3" OAL U/D 5/8" upcut

A1-500-1375-2L
Ajouter au panier

1/2" x ( 7/8" ou 1-1/8" ) x 1/2" x ( 2.5" ou 3" )

1/2-Comp
Achetez 25 et obtenir une boite de 4000 Etiquettes Non Permanent GRATUIT !
Ajouter au panier
1/2" Outil à Compression
  • 7/8" Cut Length, 2.5" Overall Length - Part # R60-12007-CNC
  • 1-1/8" Cut Length, 3" Overall Length - Part # RA-60171-CNC

1/2 x 1-1/8 x 1/2 x 3 OAL U/D 2 FL COATED

R60-12004UM
Ajouter au panier
Ultimax line of coated tooling

** Introducing the Ultimax line of coated tools. The special coating will prolong the life of the tool in abrasive materials, in most cases the coated tools have lasted 2-3 times longer that the regular carbide tools. **

 

Note: The coating will not prevent chipping cause my debris in the material. These tools can be sharpened but the coating will be removed and will no longer be effective after the sharpening.

1/2" x 1-3/8" x 1/2" x 3-1/2"oal 2fl compression

VX03152
Liquidation
Ajouter au panier

1/2" x 1-3/8" x 1/2" x 3" Gauche

CUD-500-2L
Liquidation
Ajouter au panier

1/2" x 1-5/8" x 1/2" x 4" 2 flute

R60-11405
Ajouter au panier

Replaces CUD-500-6

1/2" x 2-1/2" x 1/2" x 4-1/2" OAL 2 flute

R60-11410
Ajouter au panier

3/4" x 1-5/8" x 3/4" x 4"

CUD-750-2
Ajouter au panier

3/4" x 2-1/2" x 3/4" x 5"

CUD-750-4
Ajouter au panier