k_pm-062100

Panelmetrix Diamond Package

Ajouter au panier

Includes the following:

  • 1x Polycrystalline Diamond V-Groover (DIA-RTR.26A)
  • 1x Polycrystalline Diamond Utility Tool (DIA-RTR.26B)
  • 1x Polycrystalline Diamond Raised Panel Profile (DIA-RTR.40(A or E))
  • 1x Polycrystalline Diamond Inside Profile (DIA-RTR.40(B, C, or D))
  • 1x Polycrystalline Diamond Door Edge Tool (DIA-RTR.016(C or D))
  • 1x Polycrystalline Diamond Pocketing Tool (DIA-RTR-2009)
  • 1x 1/2" Solid Carbide Downshear (R57-32232)
  • 1x 1/8" Solid Carbide Downshear (CD-125-2)

ADVANTAGES
- EXTENDED TOOL LIFE
    Polycrystalline Diamond Tools allow higher removal rates while maintaining sharpness up to 200 times longer than Solid Carbide Tooling.

- CONSISTANT QUALITY
    Cut Quality is maintained during high volume production. Door # 200 will look as good as Door #1 !

- COST REDUCTION
    Annual tooling cost per unit is dramatically reduced compared to Solid Carbide tooling.

DIAMOND TOOL CHOICES

 ** Click on the "More Images" icon on the right of the diamond tool selection to view the available profiles. **

DIA-RTR.26A

DIA-RTR.26A
Ajouter au panier
Polycrystalline Diamond V-Groover
For Beveling and Square Corner Doors.

DIA-RTR.26B

DIA-RTR.26B
Ajouter au panier
Polycrystalline Diamond Utility Tool
For Cleaning Out Corners

DIA-RTR.40A

DIA-RTR.40A
Ajouter au panier
Polycrystalline Diamond Raised Panel Profile

DIA-RTR.40E

DIA-RTR-40E
Ajouter au panier
Polycrystalline Diamond Raised Panel Profile

DIA-RTR.40B

DIA-RTR.40B
Ajouter au panier
Polycrystalline Diamond Inside Profile

DIA-RTR.40C

DIA-RTR.40C
Ajouter au panier
Polycrystalline Diamond Inside Profile

DIA-RTR.40D

DIA-RTR.40D
Ajouter au panier
Polycrystalline Diamond Inside Profile

DIA-RTR.016C

DIA-RTR.016C
Ajouter au panier
Polycrystalline Diamond Door Edge Tool

DIA-RTR.016D

DIA-RTR.016D
Ajouter au panier
Polycrystalline Diamond Door Edge Tool

DIA-RTR.2009

DIA-RTR.2009
Ajouter au panier

Polycrystalline Diamond Pocketing Tool

** NOT FOR USE WITH eCABIENT SYSTEMS **

Suggested Feed Rate - 800" per min @ 14,000rpm

For pocketing applications, shaker doors and surfacing.
Ajouter au panier
Ajouter au panier